If the vehicle’s battery goes flat during flash process:
- The vehicle will be immobilised. The ECU and Ezy-FLASH Pro will need to be removed from the vehicle and sent in for recovery. Contact ChipTorque for further instructions on recovery procedures, this is not warrantable.
If a flash failure occurs during locking:
- DO NOT TURN THE KEY OFF.
- Try to unlock the Ezy-FLASH Pro.
- If that is not possible, try to reflash/lock again.
- If that fails, unplug, then reconnect the Ezy-FLASH Pro – repeat the process.
If a flash failure occurs during reflashing:
- DO NOT TURN THE KEY OFF.
- Try to reflash again – if the reflash fails again, try a different tune.
- Try unlocking the Ezy-FLASH Pro.
- If that fails, unplug, then reconnect the Ezy-FLASH Pro – repeat the process.
If a flash failure occurs during unlocking:
- DO NOT TURN THE KEY OFF.
- Try to unlock again.
- If that fails, unplug, then reconnect the Ezy-FLASH Pro – repeat the process.